MTA pro

Modular Amplified Tunable Single-Mode Lasers for 19” rack integration

  • Up to two lasers in TA pro, BoosTA pro or DL/DFB pro configuration
  • Spectral coverage 369 .. 1770 nm with powers up to 2 W from PM fiber
  • Includes AutoAlign for coupling into tapered amplifier and output fibers
  • Low noise and drift, narrow linewidth
  • Digital control via DLC pro for best performance and convenience

The MTA pro combines up to two MTA TA pro amplified laser systems into a 19” sub-rack and seamlessly integrates into the T-RACK or other suitable 19” racks. The modular design also enables integration of MTA BoosTA pro amplifier only modules or DL/DFB pro laser modules. MTA pro integration of the latter may help to avoid an extra MDL pro and comes with additional features and options.

Like all building blocks of TOPTICA’s Laser Rack Systems, the MTA pro is designed to clear optical tables and to stow away lasers into a 19" form factor. It is ideally suited for integration into TOPTICA Laser Rack Systems that allow researchers to focus on their experiment rather than on their laser system.

When operated in TOPTICA’s T-RACK, the MTA pro has the same optical specifications as a fiber-coupled TA pro system. On top of that, it always includes AutoAlign, a fully-automated push-button coupling optimization into the tapered amplifier and the optical output fibers. Moreover, MTA pro supports output power stabilization.

The MTA pro modular laser unit features a full-extension pull-out mechanism and dynamic cable management, both ensuring easy access to the laser modules. Moreover, it offers passive vibration isolation decoupling the lasers from the environment. The unit consumes a total of 4 Rack Units (RU) in height, including an extra 1 RU blanking front panel recommended for thermal isolation between laser units. Optical output is fiber-delivered allowing for flexible laser light delivery wherever required.

The MTA pro laser modules are controlled with TOPTICA’s DLC pro. Its digital architecture enables low-noise laser operation, intelligent locking functions and remote control via Ethernet.

 

Request a quotation Download the product brochure
  • Specification

    DLC MTA pro
    Modular Laser Unit    		 Includes TA pro AL laser head which is passively vibration isolated against the modular laser base
    Integrated modules Up to 2 modules of configuration MTA TA pro (HP/DFB/DFB HP), MTA BoosTA pro (HP), MTA DL pro (HP) or MTA DFB pro
    Dimensions laser unit Height: 4 RU (including 1-RU blanking front panel), Width: 19“, Depth: 722 mm
    Weight < 30 kg (MTA pro laser unit), < 8.5 kg (DLC pro control unit)
    Power consumption < 200 W
    Environment temperature 15 - 30° C (operation), 0 - 40° C (storage and transport)
    Environment humidity Non condensing

    MTA module MTA TA pro MTA BoosTA pro MTA DL pro (HP) MTA DFB pro
    Wavelength range [nm] 660 - 1540 * 369 .. 1770* 633 .. 1770*
    Power ex fiber [mW] Up to 2000 6 .. 220 1 .. 80
    Typical tuning range [nm] 10 .. 50 2 .. 6
    Mode-hop-free tuning [GHz] 20 - 50 depends on seed laser typ. ≥ 20 Up to 1400
    Typical instantaneous linewidth (kHz) 0.6 .. 90 kHz (DL pro master),
    20 .. 500 kHz (DFB/DBR master)    		 depends on seed laser 0.6 .. 90 kHz (DL pro master) 20 .. 500 kHz

    Polarization Linear > 100 : 1
    ASE background (0.05 nm) typ. < -40 dB depends on seed laser typ. < -40 dB
    Optical isolators Internal and output isolators included where required
    Fiber coupling Fiber coupling included for all input and output beams
    Output fiber coupling efficiency min. 50 %, typ. 60 % min. 55 %, typ. 65 %**
    Monitor photo diodes Included for monitoring of AutoAlign into amplifier chip and for power stabilization where applicable
    AutoAlign Included for coupling into amplifier chip and output fibers
    Frequency modulation Mod AC and Mod DC N/A Mod AC and Mod DC
    Intensity modulation TA-Mod for amplifier included N/A
    Cooling Water cooling required (e.g. DLC Chiller) Active cooling not required
    Control unit DLC pro (digital)
    Maximum TA current 5 A (with DLC pro TA), 10 A (with DLC pro TA HP) N/A
    User Interface Multi-Touch, knob and total remote control
    Locking options DLC pro Lock, FALC pro, PDH/DLC pro, FALC 110 and PFD
    Dimensions control unit Height: 4 RU (including 1-RU ventilation front panel), Width: 19“, Depth: 308 mm
    Operating voltage 100 .. 120 V / 220 .. 240 V AC, 50 .. 60 Hz (auto detect)

     *Spectral coverage with gaps
    **Efficiencies are possibly lower with strong ellipticity or short wavelengths
    Specifications are subject to change without further notice

  • Additional Information
    TOPTICA AG - Wavelengths available from MTA pro and corresponding optical output power levels (ex-fiber) Wavelengths available from MTA pro and corresponding optical output power levels (ex-fiber)
  • Options
    • Narrow linewidth and motorization option for many DL pro type (seed) lasers.
    • Lock Option for DLC pro: Software license that enables a number of features on a specific DLC pro. These allow to control the frequency of a laser for example by using a saturated absorption spectroscopy setup with a reference cell.
    • PDH/DLC pro and FALC pro locking modules for DLC pro: high bandwidth locking to allow active linewidth narrowing and phase locking.
  • Applications
  • Downloads
  • Literature
  • Related Products

    Laser Rack Systems

    • T-RACK Laser Rack for 19'' TOPTICA Modular Systems and Units
    • MDL pro Modular Tunable Single-Mode Diode Laser System
    • MSHG pro Modular Frequency-Doubled Tunable Laser System
    • MDFC Modular Difference Frequency Comb
    • MOM Modular Opto-Mechanics Breadboard Unit

     

    Table-Top Systems

     

    General